Alphacool HardTube Bending Kit Basic

Article no.: 29143
EAN: 4250197136280
Weight: 1 kg
Verfügbar:
Images may differ slightly from the original

€44.98 *

Prices incl. VAT plus shipping costs

Liefertermin: in 13 - 14 Tagen

Alphacool pit saw for Acryl/PETG tubes 35cm

€16.98*

Alphacool Eiskoffer Professional - bending & measuring kit

€249.98*

Alphacool Eiskoffer - gloves size 10

€7.98*

Alphacool Eiskoffer Basic - bending kit

€99.98*

Alphacool Eiskoffer Light - bending kit

€59.98*

With the Alphacool HardTube Bending Kit Basic you everything you need to cut, deburr and bend... more

Close menu

Product information

With the Alphacool HardTube Bending Kit Basic you everything you need to cut, deburr and bend your 10mm and 13mm inner diameter PETG tubes.

Deburring made easy
Everyone who works with HardTubes knows that they must deburr all ends of the tubes. The classic deburrer from Alphacool offers the ability to deburr HardTubes inside and outside. The external deburring is extremely important so that the HardTubes fit perfectly and do not damage any O-rings. The inner deburring is only used to remove cutting residue. For clean deburring, the deburrer has three steel blades with sharpened edges. The deburrer fits perfectly in the hand due to its large round shape.

Cutting PETG tubes
The Eistools Modding Cutter works like scissors and is ideal for cutting PETG HardTube . Please note that acrylic HardTube cannot be cut with this tool as they would shatter when cut. Of course, you can also use it to cut cables and other soft components. If you want to cut angles, the integrated protractor can be used.

Bending tool and silicone inserts
A silicone insert is absolutely necessary for bending HardTubes. The Silicone Insert prevents the tube from collapsing at the bends. To help the insert glide better, use a waterbased lubricant or similar. Oil based Lubricant and too much soap should be avoided and never use alcohol as this can damage plastics such as PETG . With the small but practical bending tool you can easily bend simple angles. The tube is pushed into the bending tool, heated with a heat gun and can then be bent very easily.

The only additional items you will need are the HardTubes and a heatgun that can produce low emperatures. With this simple combination you can make the liquid cooled PC of your dreams.

Scope of delivery:
1 x Silicon Bending Insert 100cm HardTubes with 13mm inner diameter
1 x Silicon Bending Insert 100cm HardTubes with 10mm inner diameter
1 x PETG and Acrylrohr Deburrer - Light Version
1 x Double Bending Tool for 12-14 und 16mm HardTubes
1 x Eistools Modding Cutter for PETG HardTubes

Data sheet PDF: Alphacool HardTube Bending Kit Basic