Top seller
Alphacool Silicon Bending Insert 100cm for ID 3/8" / 10mm HardTubes - Blue
€9.98
*
Delivery date: in 14 - 15 days
Alphacool Silicon Bending Insert 30cm for ID 3/8" / 10mm HardTubes - Blue
Content
30 Zentimeter
(€26.60 * / 100 Zentimeter)
€7.98
*
in stock
No results were found for the filter!
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply insert the silicone insert into the acrylic tube and heat the desired area. Thanks to the extremely heat-resistant silicone, the tube can then be...
€9.98
*
Delivery date: in 14 - 15 days
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply insert the silicone insert into the acrylic tube and heat the desired area. Thanks to the extremely heat-resistant silicone, the tube can then be...
Content
30 Zentimeter
(€26.60 * / 100 Zentimeter)
€7.98
*
in stock
Alphacool has now developed a bending tool for different sizes which makes laying and bending the HardTubes child's play! HardTubes with a thickness of 12 - 14mm as well as 16mm are no problem. Curves of up to 180° can be bent easily...
€17.98
*
in stock
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply insert the silicone insert into the acrylic tube and heat the desired area. Thanks to the extremely heat-resistant silicone, the tube can then be...
€10.98
*
in stock
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply insert the silicone insert into the acrylic tube and heat the desired area. Thanks to the extremely heat-resistant silicone, the tube can then be...
Content
30 Zentimeter
(€29.93 * / 100 Zentimeter)
€8.98
*
in stock
The Eiskoffer bending tool is probably the most comprehensive tool set for anyone who wants to equip their PC with hard tubes. All tools, angles and other necessary products required for bending hard tubes can be found in this case....
€262.98
*
Delivery date: in 2 - 3 weeks
With the Alphacool measuring kit, the lengths and angles can be measured quickly and easily in order to bend HardTubes perfectly and precisely. The set also includes rulers of different lengths, corresponding angles and a distance meter....
€26.98
*
in stock
HardTube saw tool - cutting gauge from the new ice cream case set. With this cutting gauge, cutting the hardtubes is child's play. The special rubber guides for 13 and 16mm hardtubes prevent the hardtubes from slipping and being...
€16.98
*
in stock
45° bending feeder 2 versions for 3 dimensional bending Pipes with Ø 13 or 12 mm The horizontal angle can be freely adjusted by 180°. To do this, loosen the rear M4 screws using the included hexagon socket and set the required angle...
€4.97
*
in stock
90° bending feeder 2 versions for 3 dimensional bending Pipes with Ø 13 or 12 mm The horizontal angle can be freely adjusted by 180°. To do this, loosen the rear M4 screws using the included hexagon socket and set the required angle...
€17.98
*
in stock
Flex bending feeder Investors for particularly large or freely adjustable radii. It is also possible to change the radius in its course, i.e. to narrow or widen it. The average radius is indicated by a marker. Min. radius: 75 mm Max....
€17.98
*
in stock
Fitting stop Stop with fixed insertion depth: 6 mm for pipes with Ø 13 or 12 mm 11 mm for pipes with Ø 16 mm The depth is indicated by a marker The insertion depth is designed for the slip depth of Alphacool Hard-Tube connections. You do...
€9.98
*
in stock
Circular arc feeder Small version Pipes with Ø 13 or 12 mm are bent by a radius of 23.5 mm Pipes with Ø 16 mm are bent by a radius of 22 mm Do not bend the pipe beyond an angle of 180° so that it can be removed again once it has cooled...
€26.98
*
in stock
Circular arc feeder Large version Pipes with a diameter of 13 or 12 mm are bent to a radius of 33.5 mm, pipes with a diameter of 16 mm are bent to a radius of 32 mm Do not bend the pipe beyond an angle of 180° so that it can be removed...
€27.98
*
in stock
Multi-bending feeder possible angles: 30°, 45°, 60°, 90° Large version Pipes with Ø 13 or 12 mm are bent by a radius of 33.5 mm Pipes with Ø 16 mm are bent by a radius of 32 mm Do not bend more than an added angle of 180° so that your...
€26.98
*
in stock
Multi-bending feeder possible angles: 30°, 45°, 60°, 90° Small version Pipes with Ø 13 or 12 mm are bent by a radius of 23.5 mm Pipes with Ø 16 mm are bent by a radius of 22 mm Do not bend more than an added angle of 180° so that your...
€26.98
*
Delivery date: in 2 - 3 weeks
Measuring tool 190mm For measuring the distances between the fittings that you want to connect. You can also connect the measuring tongues to each other or mount them on the bending plate to transfer measurement results. manual
€17.98
*
in stock
Measuring tool 140mm For measuring the distances between the fittings you want to connect. You can also connect the measuring tongues to each other or mount them on the bending plate to transfer measurement results. manual
€13.98
*
in stock
