Close filters
No results were found for the filter!
ROH O-Ring 11 x 2mm (G1/4 Zoll ohne Nut) O-ring 11 x 2mm (G1/4 inch without groove)
This O-ring serves as a replacement seal for connections that do not have a groove where the O-ring can normally fit. However, due to the slightly larger thickness of the seal, a tight seal is also guaranteed here. Technical details:...
€0.39 *

in stock

ROH O-Ring 44 x 1,5mm (CPU Alphacool Kühler) O-Ring 44 x 1,5mm (CPU Alphacool Kühler)
This O-ring is a spare gasket for the popular CPU waterblock from Alphacool.It is inserted between cooling plate and cover of the waterblock. Compatibility: Yellowstone,Livingstone,Niagara,Missouri,XP,XP-Light,Bold,HP Pro Extent of...
€1.69 *

in stock

ROH O-Ring für Alphacool Cape Cora HF T-Verbindungsstück EOL Alphacool Cape Cora HF O-Ring for T-connector piece
This O-ring is intended as a replacement part for the Alphacool Cape Cora HF T-connector. Technical details: Material: NBR Scope of delivery: 1x O-ring
€1.79 *

in stock

ROH O-Ring 32,5x3mm NBR70 O-ring 32.5x3mm NBR70
This is a replacement seal for G1 inch thread This O-ring fits all 1 inch threads as well as the Lighttower adapter for the Phobya DC 260/400 pumps. Technical details: Dimensions: 32.5 x 3mm
€0.30 *

in stock

ROH O-Ring 48 x 2,5mm (Laing DDC Pumpe) O-Ring 48 x 2,5mm (Laing DDC Pumpe)
This is a spare gasket for the popular Laing DDC 1T & 1 Plus pump. When replacing the original top on a Laing pump the important inner O-ring may be damaged. To allow use of the pump again we offer the suitable spare gasket here....
€1.69 *

in stock

ROH O-Ring für Alphacool Cape Cora HF T-Verbindungsstück und Mittelstück (Neu) O-ring for Alphacool Cape Cora HF T-connector and middle piece (new)
This O-ring is intended as a spare part for the connectors of the popular Alphacool Cape Cora HF. Technical details: Dimensions (ODxH): 22 x 2mm ID: 18mm Scope of delivery: 1x O-ring for Alphacool Cape Cora HF T-connector and middle piece
€1.79 *

in stock

ROH O-Ring 32 x 2mm für Alphacool DC-LT Pumpe O-ring 32 x 2mm for Alphacool DC-LT pump
This is a spare part seal for the popular Alphacool DC-LT pump. By converting the pump with new covers, damage can occur to the important part of the internal O-ring. So that you can use the pump again, we offer the appropriate...
€1.79 *

in stock

ROH O-Ring 12,5 x 1,5mm (für HT 13mm Anschraubtülle) O-Ring 12,5 x 1,5mm (für HT 13mm Anschraubtülle)
This O-ring is mainly used as a spare part for the 13mm HT screw-on sleeves from Alphacool. Technical Data: Material: Nitrile rubber Inner diameter: 12,5mm O-ring thickness: 1,5mm Scope of delivery: 1x O-ring
€0.39 *

in stock

ROH O-Ring 11 x 3mm (für HT 13mm Anschraubtülle) O-Ring 11 x 3mm (für HT 13mm Anschraubtülle)
This O-ring is mainly used as a spare part for the 13mm HT screw-on sleeves from Alphacool. Technical Data: Material: Nitrile rubber Inner diameter: 11mm O-ring thickness: 3mm Scope of Delivery: 1x O-Ring
€0.29 *

in stock

ROH O-Ring 14,8 x 3,1mm (für HT 16mm Anschraubtülle) O-ring 14.8 x 3.1mm (for HT 16mm screw-on nozzle)
€0.29 *

in stock