M.2 NVMe 2280 SSD water cooler

WAH Alphacool HDX Pro Water - M.2 NVMe 2280 SSD - MCX Version

Article no.: WAH
EAN: 4250197117692
Weight: 0,15 kg
Available: There are more than 50 units available
Images may differ slightly from the original

€49.98 *

Prices incl. VAT plus shipping costs

in stock

Alphacool Eisschicht Light Thermal Pad - 7W/mK 120x20x0.5mm

€5.99*

Alphacool Eisschicht Light Thermal Pad - 7W/mK 120x20x1.5mm

€4.97*

Alphacool EPDM tube 5/3 - Black 3m (9,84ft) Retailbox

€13.98*

Alphacool Tec Protect 2 Clear 1000ml

€13.98*

Alphacool MCX Cap - Black Set of 10

€2.98*

Alphacool MCX 5x distributor G1/4

€12.98*

SSDs in M.2 format are now standard PC equipment. The high transfer rates and extremely low... more

Close menu

Product information

SSDs in M.2 format are now standard PC equipment. The high transfer rates and extremely low access times allow faster and more effective work or gaming on the PC. To ensure that you can use the full performance of the M.2 NVMe SSD permanently, Alphacool offers the HDX Pro Water M.2 NVMe 2280 SSD cooler (MCX version). It is a useful extension for any water circuit and ensures that the M.2 SSD memory can release its full potential.

Why an active M.2 cooler?
Due to their design, M.2 SSDs are only able to reach their maximum performance for a short period of time. The controller chip heats up extremely quickly and begins to throttle the performance of the M.2 SSD early on to prevent overheating. Independent tests have shown that during write operations, the transfer rates of uncooled M.2 SSDs can drop after just 30 seconds. During read operations, throttling usually occurs a few seconds later. With the Alphacool HDX Pro Water M.2 NVMe 2280 SSD cooler (MCX version), you can use the maximum performance of the SSD over a longer period of time. This is clearly noticeable during longer read and write operations.

Assembly
The HDX Pro Water M.2 NVMe 2280 SSD cooler is compatible with M.2 NVMe 2280 SSDs that are equipped on one or both sides. If the PCB is equipped with memory chips on both sides, the 0.5 mm thermal pad is used on both sides. If memory chips are only installed on one side, the 1.5 mm thermal pad is used on the side without chips. After the top and bottom of the SSD have been equipped with thermal pads, the SSD memory is pushed into the retaining clip and mounted under the cooler. The cooler has an inlet and outlet on each side suitable for 5/3 mm hoses. With the help of the MCX 2x distributor and the 5/3 mm hose, the HDX Pro Water M.2 NVMe 2280 SSD cooler (MCX version) can be easily and space-savingly integrated into the water circuit. This variant is a sensible choice if there is little space in the PC case and optimal hose paths are difficult to achieve.

Compatibility:
- M.2 NVMe 2280 SSD

Technical data cooler
L x W x H	70.7x23.4x10.9mm
Radiator base material	nickel-plated brass
Material radiator top	Brass
Material Clip	plastic
Connections	2x hose nozzles 3mm screwed in
Thickness radiator base	1.6mm
Thermal Conductivity Thermal Pads	3 W/mK
Maximum working temperature	60°C
Pressure tested	0.8 bars
Weight	61g
Color	silver

Technical data distributor
L x W x H	30x29x18mm
material	Acetal
Hose length	1m
Hose size	5/3mm
Material hose	PVC
Connections	2x G1/4" internal thread \| 2x hose nozzles 3mm screwed in
Max. thread length G1/4" connections	5.5mm
Maximum working temperature	60°C
Pressure tested	0.8 bars
Weight	28g
Color	black

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Technical details mehr

Technical details