- Article no.: 13295
- EAN: 4250197132954
- Weight: 0,8 kg
- Images may differ slightly from the original
Prices incl. VAT plus shipping costs
Liefertermin: in 4 - 5 Tagen
With the Alphacool Eisstation, you get a compact reservoir that fits into nearly any case. It comes in three different versions. A DDC, a D5, and a DC-LT version are available.
- The cap is made of sturdy Nylon
- Three versions for all current pumps
- Numerous mounting options
- Illuminated logo and LED mounting options
The Alphacool Eisstation reservoir is extremely compact and is available in three versions suited for different pumps. D5, DDC and DC-LT versions are available. Each pump is installed in the bottom of the Eisstation and is not visible from the outside. The bottom of the Eisstation is a metal plate that reduces vibrations and increases the stability of the Eisstation.
The installation options are numerous and comprehensive. The Eisstation can be screwed onto a 2.5” SSD bracket. It can also be mounted in a 3,5” bay. In either case, the special decoupling screws included with the Eisstation are used for mounting it. This minimises the transfer of vibrations to the case, lowering the operating volume significantly. Another installation option is the included Velcro fastener. One part of the Velcro is glued to the bottom of the Eisstation, while the other part is glued to the case. Then all that’s left is to press the Eisstation’s bottom against the corresponding Velcro on the case. The size of the Velcro ensures secure positioning even during transport.
The Eisstation can be mounted vertically or horizontally, depending on personal taste and available space.
There are four possibilities for connection. An IN and an OUT with G1/4 threads are located on the top, with the illuminated logo. In the cap, there is one G1/4” and one G3/8” connection available. The G3/8” connection, with its larger size, simplifies filling the Eisstation and can also serve as a lighting module for 5mm LEDs. Two additional 5mm LED places can be found in the bottom of the reservoir and illuminate the water-filled portion from below.
A highlight of the Eisstation is the materials it is composed of. The bottom portion has a high-quality soft-touch surface which gives it an outstanding look and feel. The upper portion and the reservoir itself are not made of simple, easily breakable Plexiglas, but rather of extremely sturdy Nylon. While normal reservoirs made of glass or Plexiglas can break or crack due to falls, even from a small height, or due to improper handling, it is nearly impossible to damage the Eisstation’s clear container.
Technical Details Eisstation
- Dimensions (LxWxH): 102 x 82 x 105mm
- Capacity: 250ml
- Material: Nylon / PMMA
- In / Out: G1/4"
- Connections: 3x G1/4" and 1x G3/8"
- Power connection LED Logo: 3 Pin
- Lighting modules: 4x for 5mm LED's
Technical Details Eispumpe VPP755 V.3
- PWM controlled pump
- Connection: 4Pin PWM / 4Pin Molex
- Start Boost Function
- Improved Software
- New bearing for the ceramic axis
- 5 adjustable steps
- 1. 2100 rpm 120l/h
- 2. 2700 rpm 140l/h
- 3. 3330 rpm 280l/h
- 4. 3950 rpm 320l/h
- 5. 4350 rpm 340l/h
- Maximum Head Pressure: 4.25m
Scope of Delivery
- 1x Alphacool Eisstation VPP reservoir incl. Alphacool Eispumpe VPP755 V.3 pump
- 1x Metal bottom
- pump bracket
- Mounting screws
- 4x Decoupling screws
- Self-adhesive velcro
Removing the impeller from the ceramic shaft will cause the upper ceramic clamping ring to over-expand, which will destroy it! Removal will void the pump’s warranty!
If the pump is put together again and put back into operation, the clamping ring will loosen, which is not accepted as grounds for a return or exchange...
Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.