140mm aRGB high performance fan

L14 Alphacool Rise Aurora 140mm Lüfter Weiß (140x140x25mm)

Article no.: 24851
EAN: 4250197135832
Weight: 0,236 kg
Available: There are more than 250 units available
Images may differ slightly from the original

€14.98 * €18.98 * (21.07% Saved)

Prices incl. VAT plus shipping costs

in stock

Alphacool NexXxos Radiator Fan Mounting Screw M3 x 37 mm - 4 pieces

€3.48*

Alphacool Ice Matrix connection cable - 10cm

€1.59*

Alphacool Eiszapfen angle adapter 45° rotatable G1/4 AG to G1/4 IG - White

€6.99*

Alphacool Eiszapfen double nipple rotatable G1/4 AG to G1/4 AG - White

€3.97*

Alphacool Shroud & Decoupling 140mm (7mm thick) incl. 4x M3x37mm screws

€5.48*

Alphacool NexXxoS XT45 Full Copper 280mm Radiator V.2 - White Special Edition

€94.99*

The Alphacool Rise Aurora fan offers a wide range of control as well as superior Digital RGB LED... more

Close menu

Product information

The Alphacool Rise Aurora fan offers a wide range of control as well as superior Digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design can create some unique effects whilst offering performance.

Brilliant illumination
There are 24 digitally addressable 5V RGB LEDs built into the frame and hub that illuminate the entire fan. This creates a unique illumination that looks very impressive. Thanks to the recessed light diffusers, the light is distributed evenly, and you will not see sporadic uneven lighting.

Wide control range and silent
The fan can be controlled from 0 to 2000 rpm via the 4-pin PWM connector. In addition, it offers a silent mode, with which the fan can be regulated down to 0 rpm and then they will only start when they are needed above 600rpm. At 800 rpm, the fan is almost silent. At 2000 rpm, it offers an air flow rate of 154.1m3/h coupled with a high static pressure of 2.20mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for alternatively, as a case fan. Decouplers are located directly on the corners of the frame. The soft foam pads reduce the transmission of vibrations to the case, which in turn reduces noise. Tear-off edges on the fan blades also provide a significant reduction in noise.

Connectors?
The fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected to the motherboard or a fan controller without the need for additional adapter cables or extensions. The digital aRGB LED illumination is controlled via a JST 3-pin connector and adapters are available to change this into a standard 3 pin aRGB connector if required.

Technical data fan
L x W x H	140 x 140 x 25mm
RPM	0-2000 rpm (+/-10%)
Bearing	Sleeve Bearing
Connection	4-Pin PWM
Length PWM cable	40cm
Voltage	12V DC
Power consumption	6,6 Watt (max)
Current consumption	0,50A (0.55A max)
Static pressure	2,20 mm/H2O
Max. air flow	154,1 m³/h
Noise	max. 38,4 dB(A)
MTBF	30,000h
Speedometer signal	yes
Auto-Restart	yes
Weight	206g
Color	white

Technical data aRGB illumination
LED type	5V aRGB
Connection	3-Pin JST
Cable length	50cm (Splitter after 40cm)
Max. current consumption LEDs	3,5W
LED quantity	Frame: 16 / Hub: 8

Warranty: 3 years
🔗 Warranty Terms

Technical details mehr

Technical details

Manufacturer:	Alphacool
Rated speed range:	0 - 2000 U/min
Air conveying area:	150 - 199 m³/h
Air flow rate:	154,1 m³/h
Pressure:	2,20mm H2O
Color Frame:	White
Color Rotor:	White
Nominal voltage:	12V DC
Size:	140mm
Volume:	38,4 dB(A)
RPM signal transmission:	Yes
Volume range:	30 - 49,9 dB(A)
Lebensdauer (bei 25°C):	30.000 h
Power connection:	4Pin
Dimensions:	140 x 140 x 25mm
LED:	ARGB
Power consumption:	6,6W