Alphacool Eiszapfen PRO 16mm HardTube Fitting G1/4 - White Sixpack
- Article no.: 17484
- EAN: 4250197174848
- Weight: 0,16 kg
- Available:
- Images may differ slightly from the original
Prices incl. VAT plus shipping costs
Liefertermin: in 3 - 4 Wochen
The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the well-known Eiszapfen. When developing the fittings, Alphacool focused specifically on a specific problem: the deformation of PETG HardTubes at high temperatures. These can deform at as little as 60°C. Although such a temperature is rarely reached, it can still occur. The Eiszapfen PRO prevent this problem from the outset and hold the tubes in position.
The new nylon inserts inside prevent deformation and stabilize the hard tubes. The fitting also still has an O-ring and a compression seal. However, the contact surface is much larger than with normal O-rings, which ensures a better hold. The insert and the compression seal in the screw connection strengthen the tube from the inside and outside.
The HardTube does not slip even under higher loads. Alphacool has tested the tensile strength of up to 8kg! So you don't need to worry about that.
Technical data | |
material | Brass |
Color | White |
Height | 23mm |
diameter | 26mm |
Thread length | 5mm |
thread | G1/4“ |
HardTube Size | 16mm |
compatibility | PETG, acrylic, brass and glass tubes |
Weight | 42g |
Download data sheet PDF: Alphacool Eiszapfen PRO 16mm HardTube Fitting G1/4 - White Sixpack
Fitting Map: Here you will find an interactive overview of all Alphacool connections.
Drehbar: | Nein |
Gewindelänge: | 5mm |
Hersteller: | Alphacool |
1. Seite: | G1/4" Außengewinde |
Spezifikation: | Form: gerade |
2. Seite: | 16mm Hard Tube |
Material: | Messing |
Farbe: | weiß |
Kompatibilität: | Acrylrohre, Carbonrohre, Messingrohre |
Liefertermin: in 3 - 4 Wochen
in stock
in stock
in stock
in stock
in stock
in stock
in stock