WAR Alphacool NexXxoS RXP-1 RAM-Cooler Black (DDR1/DDR2/DDR3/DDR4) - G1/4 PHT EOL | RAM Cooler | Shop

WAR Alphacool NexXxoS RXP-1 RAM-Cooler Black (DDR1/DDR2/DDR3) - G1/4 PHT

This product is currently not available.

Article no.: 17024
EAN: 4250197170246
Weight: 0,233 kg
Available:
Images may differ slightly from the original

€16.98 *

Prices incl. VAT plus shipping costs

Liefertermin: in 6 - 7 Wochen

Alphacool's first ram cooler for a showcase circuit! In a water cooling system, if the case... more

Close menu

Product information

Alphacool's first ram cooler for a showcase circuit!

In a water cooling system, if the case does not have fans, the RAM modules should not be neglected. Especially if the air flow in the system stops completely, the factory-installed heat spreaders do not really help to reduce the temperature. An active solution is needed!

The most effective solution is to integrate the ram modules into the water cycle. The developers have developed a very simple but effective solution for this.

It is important that each memory module is cooled individually! The coolers can be mounted offset from one another. This ensures that two memory banks next to one another are optimally cooled. However, if there are more than two slots next to one another, one slot or the outer slots should be left free between the modules, as this will guarantee perfect installation.

The cooler is supplied with 2 thermal pads and is designed for RAM modules that use memory on both sides. With the help of additional thermal pads, optionally available from us, single-sided modules can also be cooled.

To install, simply loosen three small screws on the side, remove the protective film from the first pad, and insert the pad with RAM into the cooler.

Then prepare the second pad, place it on top and screw it back on, done. The module with cooler can now be installed in the slot.

Visually, these memory coolers with the shiny Alphacool-typical copper look are perfect for a uniform appearance.

Technical details:

Material: copper, brass connections
Colour: black nickel-plated
Compatibility: DDR, DDR2, DDR3, DDR-4
Dimensions (L x H x W): 125 x 46 x 18mm
Dimensions pads (L x W x H): 120 x 20 x 1mm
Thermal conductivity: 1.5W/mk
Connection thread: 1/4 inch
Weight: 233g

Scope of delivery:

1x cooler
2x thermal pads

Download 3D file (.stp)

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Technical details mehr

Technical details