Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black

Article no.: ANS
EAN: 4250197174718
Weight: 0,033 kg
Available: There are more than 100 units available
Images may differ slightly from the original

€6.49 *

Prices incl. VAT plus shipping costs

in stock

Alphacool acrylic tube and hose deburrer - Light Version

€9.98*

Alphacool HardTube 13/10mm Acrylic (PMMA) Clear 80cm - Set of 4 (320cm)

€19.98*

Alphacool Ice Tube 13/10mm Acrylic (PMMA) HardTube Satin 80cm - Set of 4 (320cm)

€23.98*

Alphacool Acrylic Tube Double Bending Tool 12-14mm and 16mm - Black

€16.98*

Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black Sixpack

€33.97*

Alphacool Eiszapfen Pro 13mm Spare Parts

€1.68*

The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the... more

Close menu

Product information

The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the well-known Eiszapfen. When developing the fittings, Alphacool focused specifically on a specific problem: the deformation of PETG HardTubes at high temperatures. These can deform at as little as 60°C. Although such a temperature is rarely reached, it can still occur. The Eiszapfen PRO prevent this problem from the outset and hold the tubes in position.

The new nylon inserts inside prevent deformation and stabilize the hard tubes. The fitting also still has an O-ring and a compression seal. However, the contact surface is much larger than with normal O-rings, which ensures a better hold. The insert and the compression seal in the screw connection strengthen the tube from the inside and outside.

The HardTube does not slip even under higher loads. Alphacool has tested the tensile strength of up to 8kg! So you don't need to worry about that.

Technical details:

Material: Brass
Colour: Deep Black
Diameter: 22mm
Height: 20mm
Thread: G1/4"
Thread length: 5 mm
HardTube Size: 13 mm
Compatibility: PETG, acrylic, brass and glass tubes
Weight: 0.023kg
Scope of delivery: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

Technical details mehr

Technical details

Drehbar:	Nein
Gewindelänge:	5mm
Hersteller:	Alphacool
Farbe:	schwarz
1. Seite:	G1/4" Außengewinde
Spezifikation:	Form: gerade
2. Seite:	13mm Hard Tube
Material:	Messing
Kompatibilität:	Acrylrohre, Carbonrohre, Messingrohre