Top seller
No results were found for the filter!
For clean and straight cutting of PVC, PUR hoses and other hoses with an outer diameter of 4 to approx. 14 mm. Color: blue
€6.29
*
Liefertermin: in 2 - 3 Wochen
This O-ring serves as a replacement seal for connections that do not have a groove where the O-ring can normally fit. However, due to the slightly larger thickness of the seal, a tight seal is also guaranteed here. Technical details:...
€0.39
*
Liefertermin: in 9 - 10 Tagen
Connect your external water cooling components elegantly and easily with PC internal cooling components without having to sacrifice high flow and large diameter hoses. The Panama HF 38 uses G 3/8 inch internal threads and a special...
€19.98
*
in stock
This O-ring serves primarily as a spare part for the 13mm HT screw-on nozzles from Alphacool. Technical details: Material: NBR Inner diameter: 12.5mm O-ring thickness: 1.5mm Scope of delivery: 1x O-ring
€0.39
*
in stock
This O-ring serves primarily as a spare part for the 13mm HT screw-on nozzles from Alphacool. Technical details: Material: NBR Inner diameter: 11mm O-ring thickness: 3mm Scope of delivery: 1x O-ring
€0.29
*
in stock
With the Pumpin gum Ball, changing the fluids is no problem. This little helper removes most of the old fluid residue from a system. The Pumpin gum Ball creates pressure in the system and removes the drops from all corners by constantly...
€9.98
*
Liefertermin: in 2 - 3 Wochen
81%
This cable is used to connect the 2/2 way solenoid valve from Alphacool. The valve is supplied with 12V power via the 4-pin Molex connector. Two of the cable lugs are connected to the valve, the other two to an on/off switch. This allows...
Content
50 Zentimeter
(€3.38 * / 100 Zentimeter)
€1.69
*
€8.98
*
in stock
Achieve the highest precision with your Alphacool Eiszapfen laser fitting. It allows you to perfectly measure your hard tubes or drill holes in your water-cooled PC. Thanks to the G1/4'' inch thread, your Alphacool laser fitting...
€9.98
*
in stock
This article contains replacement O-rings for the Alphacool Eiszapfen Pro fittings. The wide O-ring is inserted inside the Eiszapfen Pro fitting and seals the HardTube. PETG HardTubes are soft compared to acrylic HardTubes and can deform...
Content
10 Stück
(€0.17 * / 1 Stück)
€1.68
*
in stock
Replacement O-rings for the Alphacool Eiszapfen Pro fittings, size 16mm.
Content
10 Stück
(€0.17 * / 1 Stück)
€1.68
*
in stock
The Alphacool Ring Clamping Kit is used to fix TPV hoses on the icicle connectors. The metal ring is pushed onto the hose and then plugged onto the connector. The union nut of the connector presses the ring and the hose against the...
€7.98
*
in stock
